Vortrak Retractable Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra/1988-2014 2500 HD/3500 HD 8′ Bed
- 1/2 in. Thick Aluminum Slats
- Rolls Up Into Spring Loaded Canister
- Simple Release Cable Opens Cover From Either Side
- Locks With Tailgate
- Sleek Low-Profile Look
- Mildew Resistant Felt Lined Underside
- 100% Stake Pocket Hole Access For Other Accessories
- Made In The USA
- 2-Year Warranty
ACCESS Limited Edition Roll-Up Tonneau Cover. For Classic Full Size 8ft. Bed (except dually).
- Perks Not Found On Any Other Roll-Up Cover
- Includes Trail Seal Tailgate Gasket
- Includes Tie Down Style Clamps
- Includes Auto Latch II Locking System
- 5 Year Warranty
Throttle Body Spacer; Kit Contents: Throttle body spacer, gaskets, cable brackets, and hardware; Only fits models with 4.8L, 5.3L, or 6.0L Vortec engines; Not for use in California pending Air Resource Board exemption.
- Easy bolt-on installation; Improved torque performance; Increased fuel economy
- Easy Bolt-On Installation
- Improved torque performance
- Increased fuel economy
BAKFlip F1 Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 8′ Bed
- Fiberglass Reinforced Polymer Panel Top Skin
- Drive With Cover In Closed/Folded Or Flipped Up Position
- Heavy-Duty Hardware And Components
- Upgraded Latch Housing For Long-Term Durability
- Weight Rated Up To 400 lbs. Of Evenly Distributed Weight
- Advanced Impact Resistant Construction
- EPDM Outer Rail Seals For Maximum Water Resistance
- Locks With Tailgate
- Premium Density Foam Core
- Automatic Latching Panels
- 3rd Brake Light Visibility For Short And Standard Beds Only
- Extended 3-Year Warranty
BAKFlip FiberMax Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Fiberglass Reinforced Polymer Panel Top Skin
- Drive With Cover In Closed/Folded Or Flipped Up Position
- Patented Rail Design w/Load-Bearing Flange
- Supports Heavy Loads
- EPDM Outer Rail Seals For Maximum Water Resistance
- UV Resistant For Long-Term Durability
- 100% Truck Bed Access
- Automatic Latching System/Locks With Tailgate
- Weight Rated Up To 300lbs Of Evenly Distributed Weight
- Made In The USA
- Compatible With BAKBox2
- 2-Year Warranty
1.5-2-inch Suspension LevelingKit; Kit Contents: Forged torsion bar adjuster keys and shock spacers; Does not fit HD models.
- Increased ground clearance; 100 percent simple bolt-on installation; Forged torsion bar adjuster keys; Levels front of the vehicle with the rear
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Forged torsion bar adjuster keys
BAKFlip F1 Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 88-13 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Fiberglass Reinforced Polymer Panel Top Skin
- Drive With Cover In Closed/Folded Or Flipped Up Position
- Heavy-Duty Hardware And Components
- Upgraded Latch Housing For Long-Term Durability
- Weight Rated Up To 400 lbs. Of Evenly Distributed Weight
- Advanced Impact Resistant Construction
- EPDM Outer Rail Seals For Maximum Water Resistance
- Locks With Tailgate
- Premium Density Foam Core
- Automatic Latching Panels
- 3rd Brake Light Visibility For Short And Standard Beds Only
- Extended 3-Year Warranty
ACCESS Limited Edition Roll-Up Tonneau Cover. For Classic Full Size 6ft. 6in. Bed.
- Perks Not Found On Any Other Roll-Up Cover
- Includes Trail Seal Tailgate Gasket
- Includes Tie Down Style Clamps
- Includes Auto Latch II Locking System
- 5 Year Warranty
Revolver X4s Hard Rolling Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Matte black aluminum under body and clamps for a sleek, stylish appearance
- Side rail seals with smooth flat design
- Durable strap and buckles to secure the open cover while driving
- Rear corner caps for a more modern appearance
- Integrated bulkhead seal for superior sealing
- Capped aluminum slats to protect hands during operation
Revolver X4s Hard Rolling Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 8′ Bed
- Matte black aluminum under body and clamps for a sleek, stylish appearance
- Side rail seals with smooth flat design
- Durable strap and buckles to secure the open cover while driving
- Rear corner caps for a more modern appearance
- Integrated bulkhead seal for superior sealing
- Capped aluminum slats to protect hands during operation
BAKFlip G2 Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra/1988-2014 2500 HD/3500 HD 8′ Bed
- Durable Solid Core Panels w/Aluminum Skins
- Drive With Cover In Closed/Folded Or Flipped Up Position
- 100% Truck Bed Access
- Premium UV Resistance-Will Not Fade Or Chalk
- Automatic Latching Panels
- Third Brake Light Visibility For Short And Standard Bed Only
- Easy Clamp-on Design
- Weather Resistant
- Weight Rated Up To 300lbs Of Evenly Distributed Weight
- Compatible With BAKBox2
- Locks With Tailgate
- 3-Year Warranty
BAKFlip G2 Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Durable Solid Core Panels w/Aluminum Skins
- Drive With Cover In Closed/Folded Or Flipped Up Position
- 100% Truck Bed Access
- Premium UV Resistance-Will Not Fade Or Chalk
- Automatic Latching Panels
- Third Brake Light Visibility For Short And Standard Bed Only
- Easy Clamp-on Design
- Weather Resistant
- Weight Rated Up To 300lbs Of Evenly Distributed Weight
- Compatible With BAKBox2
- Locks With Tailgate
- 3-Year Warranty
Lifted knuckles Front crossmember Rear crossmember Non-torsion bar drop brackets Differential drop brackets Sway-bar links CV spacers Skid plate Hardware; 6.25in fabricated lift blocks U-bolts Hardware
- Torsion bars stay in factory location; Redesigned for easier installation; Maintains factory ride quality; Applicable with Auto Trac equipped models; Unmatched ground clearance; Axles maintain factory position and angle
- No drivetrain or exhaust modifications required; Designed to reuse factory compression travel stops; Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks; Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
Revolver X4 Hard Rolling Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 8′ Bed
- Matte Finish Industrial-Grade Vinyl
- Heavy Duty Aluminum Slats
- Patented Locking Rails Cover the Full Length of the Bed
- Rolls Tight for 100% Bed Access
- Sleek, Low profile Design
Kit Contents: Front: Lifted knuckles, diff drop brackets, front/rear drop crossmbrs, skid plate, sway bar links, CV spacers, non torsion bar drop brackets; Rear: 6.25" fabricated anti-wrap lift blocks and u-bolts; Shocks: (4) N2.0 Shocks
- Maintains factory ride quality
- No drivetrain or exhaust modifications required
- Designed to reuse factory compression travel stop
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problems
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
- Will work with Auto Trac
- Unmatched ground clearance
- Torsion bars stay in factory location
- Newly Redesigned
- Easy installation
- Axles maintain factory position and angle
- No drivetrain or exhaust modifications required
- Designed to reuse factory compression travel stops
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Torsion bars stay in factory locaton
- Redesigned for easier installation
- Maintains smooth-like factory ride quality
- Applicable with Auto Trac equipped models
- Unmatched ground clearance
- Axles maintain factory position and angle
BAKFlip MX4 Hard Folding Truck Bed Cover – Matte Finish – 1988-2013 Chevy GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Durable Aluminum Matte Finish Panels
- Drive With Cover In Closed/Folded Or Flipped Up Position
- Universal Tailgate Operation With Dual Action Seal
- 100% Truck Bed Access
- Advanced Scratch/Scuff And UV Resistance
- Rated Up To 400 lbs. Of Evenly Distributed Weight
- Injection Molded Latch Housing For Long-Term Durability
- Premium Density Foam Core
- Locks With Tailgate
- EPDM Outer Rail Seals For Maximum Water Resistance
- Automatic Latching Panels
- Extended 5-Year Warranty
Revolver X4 Hard Rolling Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Matte Finish Industrial-Grade Vinyl
- Heavy Duty Aluminum Slats
- Patented Locking Rails Cover the Full Length of the Bed
- Rolls Tight for 100% Bed Access
- Sleek, Low profile Design
ACCESS LITERIDER Roll-Up Tonneau Cover. For Classic Full Size 8ft. Bed (except dually).
- Standard Storage Straps Secure Open Cover
- 6 Reliable Clamps For Fast And Easy Installation
- Fully Operational in Extreme Weather Conditions
- Includes Auto Latch Locking System
- Additional Slide Lock Provides Extra Protection
- 3 Year Warranty
Revolver X2 Hard Rolling Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- Textured Vinyl Over Heavy-Duty Aluminum Slats
- Patented Locking Rails Secure The Full Length Of The Bed
- Easy To Use Automatic Slam Latch Operates From Either Side
- No Lifting With Easy One-Handed Rolling Design
- No Velcro Or Stitching
- 100% Truck Bed Access
- Locks With Tailgate
- Tough Security
- Full Access To Stake Pocket Holes For Accessories
- Rear View Mirror Visibility
- Compatible With BAKBox2
- 3-Year Warranty
Vortrak Retractable Truck Bed Cover – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra/1988-2014 2500 HD/3500 HD 6′ 6" Bed
- 1/2 in. Thick Aluminum Slats
- Rolls Up Into Spring Loaded Canister
- Simple Release Cable Opens Cover From Either Side
- Locks With Tailgate
- Sleek Low-Profile Look
- Mildew Resistant Felt Lined Underside
- 100% Stake Pocket Hole Access For Other Accessories
- Made In The USA
- 2-Year Warranty
Revolver X2 Hard Rolling Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 8′ Bed
- Textured Vinyl Over Heavy-Duty Aluminum Slats
- Patented Locking Rails Secure The Full Length Of The Bed
- Easy To Use Automatic Slam Latch Operates From Either Side
- No Lifting With Easy One-Handed Rolling Design
- No Velcro Or Stitching
- 100% Truck Bed Access
- Locks With Tailgate
- Tough Security
- Full Access To Stake Pocket Holes For Accessories
- Rear View Mirror Visibility
- Compatible With BAKBox2
- 3-Year Warranty
- Quick and easy installation
- Lightweight 6061 aluminum frame
- All weather seal keeps out rain and snow
- Tri-Fold Design
- Easy on or off in less than three minutes
- Completely assembled in the box – no loose parts
- No tools required – patented quick clamp system
- Drive with the cover in the open or closed position
- Tailgate lock can provide additional security
- Sleek appearance improves fuel economy
- Safety strap included
- Black vinyl bed cover
ACCESS LITERIDER Roll-Up Tonneau Cover. For Classic Full Size 8ft. Bed (except dually).
- Standard Storage Straps Secure Open Cover
- 6 Reliable Clamps For Fast And Easy Installation
- Fully Operational in Extreme Weather Conditions
- Includes Auto Latch Locking System
- Additional Slide Lock Provides Extra Protection
- 3 Year Warranty
ACCESS Limited Edition Roll-Up Tonneau Cover. For Classic Full Size 8ft. Bed (except dually).
- Perks Not Found On Any Other Roll-Up Cover
- Includes Trail Seal Tailgate Gasket
- Includes Tie Down Style Clamps
- Includes Auto Latch II Locking System
- 5 Year Warranty
BAKFlip FiberMax Hard Folding Truck Bed Cover – Rails Mounted Low Enough To Use Standard C Clamps – 1988-2013 Chevy/GMC C/K Pickup/Chevy Silverado/GMC Sierra 1500/1988-2014 2500 HD/3500 HD 8′ Bed
- Fiberglass Reinforced Polymer Panel Top Skin
- Drive With Cover In Closed/Folded Or Flipped Up Position
- Patented Rail Design w/Load-Bearing Flange
- Supports Heavy Loads
- EPDM Outer Rail Seals For Maximum Water Resistance
- UV Resistant For Long-Term Durability
- 100% Truck Bed Access
- Automatic Latching System/Locks With Tailgate
- Weight Rated Up To 300lbs Of Evenly Distributed Weight
- Made In The USA
- Compatible With BAKBox2
- 2-Year Warranty