- Easy Bolt-On Installation
- Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more efficiently
- Vertex Reservoir Shock Details:
- 8-Stage Adjustable Damping
- Monotube Design
- Nitrogen-Charged
- Remote Reservoir with Steel Braided Reservoir Line
- Massive 2.5in Piston
- 22mm Chrome-Hardened Piston Rod
- Specifically Tuned for Each Application
- 3-Stage Seal System
- CNC Machined Billet Aluminum Accents
- Zinc Plate Finish with Double Clear Coat
- Incredible >400 Hour Salt Spray Rating
- 3-year Manufacturer’s Warranty
- Increased ground clearance
Contents: Coil springs, radius arm drop brkts, sway bar link exts, track bar reloc brkt, brake line reloc brkts, pitman arm, steering stabilizer reloc brkt; 3" Lft blocks, add-a-leafs, u-bolts; Shocks: (4)N2.0 Shocks
- 100 percent simple bolt-on installation; OE caster angles are maintained; Luxury ride coil springs specifically designed for gas or diesel motors
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
Lifted coil springs; Fixed upper & Adjustable Lower control arms; Radius arm & Track -Bar drop brackets; Extended sway-bar links; Stabilizer relocation brackets; Pitman arm; Stainless steel braided brake lines; Bumpstop spacers; Hardware
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
- Includes application valved V2 series shock absorbers which offer the best in balanced performance for on and off-road use.
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
- Track width remains the same as factory
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Increased ground clearance
- Strut Includes pre-loaded coil for no-fuss assembly
- Maintains stock track width
- Can run factory 20in wheels
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
Kit Contents: Front: Coil spring spacers, radius arm drop brackets, track bar bracket, sway bar brackets, pitman arm; Rear: Rear lift spacers, track bar bracket, sway bar links, bump stop brackets, ride height arms; Shocks: (4) N2.0 Shocks
- Increased ground clearance
- Maintains factory progressive rate coil springs
- Track bar bracket keeps the front axle properly centered
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Includes application valved N2.0 series shock absorbers, which offer the best in balanced performance for on and off-road use
Kit Contents: FRONT: Lifted coil springs, Fixed lower control arms, Transfer case dropKit, Extended sway-bar links, Brake line brackets, Hardware; REAR: Add-a-leaf springs, Adjustable lift shackles, Hardware; SHOCKS: (4) Premium N3 Series
- Easy, 100% Bolt-On Installation
- Military spec
- fluid rated to -50 degrees Celsius
- Increased ground clearance
- N2.0 shocks are application valved providing optimum on and off-road performance and feature:
- Nitrogen-Charged
- Massive 1 3/8in Bore
- Chrome hardened 9/16in piston rod
- 10-Stage Variable Valving
- Spring loaded piston rod seal
Lifted Coil springs Radius arms Track Bar bracket Transmission crossmember clocking ring Sway-bar brackets Pitman arm Carrier bearing shims Hardware
- Increased ground clearance
- Track bar bracket keeps the front axle properly centered
- Radius Arms offer a more factory-like angle and feature a durable, Clevite rubber bushing for maximum vibration absorption
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Can run 33in tires on factory 20in wheels
- Provides highly sought level stance
- High clearance crossmember design gives unmatched ground clearance
- Requires no modification to the stock drivetrain or exhaust
- 100% precision laser cut materials using the latest computer aided design process
- Re-uses stock front skid plate
- Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use
Contents: Lft coil springs, radius arm drop brkts, extd sway bar links, track bar drop brkt, pitman arm, stainless steel braided brake lines, bumpstop spacers;anti-wrap lift blocks, carrier bearing drop brkt, u-bolts; Shocks: (4)N2.0 Shocks
- 100 percent bolt-on installation; Increased ground clearance; Radius arm drop brackets allow for properly set caster; Proper caster is crucial to maintaining factory handling and driveability
- Easy Bolt-On Installation
- Increased ground clearance
- Can run factory 20in wheels
- Provides highly sought level stance
- High clearance crossmember design gives unmatched ground clearance
- 100% precision laser cut materials using the latest computer aided design process
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use
- Easy bolt-on installation; Increased ground clearance; Levels the front with the rear of the vehicle; Fits diesel and gas engine models
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Fits diesel and gas engine models
Contents: Lft knuckles, front crossmbr, rear crossmbr, front skid plate, Lwr skid plate, diff drop brkts, steering stops, bumpstops, bumpstop exts, sway bar reloc brkts, brake line brkts; 4"lift blocks, u-bolts, carrier bearing shims, shock
- Increased ground clearance
- No strut disassembly or strut compressor required for installation
- Features application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Front struts are lifted 6in, eliminating the need for strut spacers
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Can run 35in tires on factory 20in wheels
1-inch Motor Mount Lift; Kit Contents: (2) Aluminum motor mount spacers, (2) couplers, and (2) 10-mm-by-60-mm bolts and washers
- Easy Bolt-On Installation
- Corrects pinion angle
- Made from 6061 Aluminum
- Spacers are corrosion resistant
2.5-inch Suspension Lift Kit; Kit Contents: Front: Strut extensions and hardware; Rear: Coil spring spacers
- Easy bolt-on installation; Increased ground clearance; Levels the front with the rear of the vehicle
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Increased ground clearance; Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
- Increased ground clearance
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Easy Bolt-On Installation
Rough Country’s 3in Bolt-On Kit offers easy installation and aggressive good looks at an incredible value. Take your truck to new heights with this excellent option for 14 and up F-150 pickups.
Lftd knckls; Strt spcrs; FandR X-membrs; Frnt and Lwr skid plts; Diff drop brkts; Steer stps; Bmpstps; Bmpstp exts; Sway-bar relocat brckts; Brk line brckts; 4.5in Fab lft blks; U-bolts; Carrier bearing shims; Brk line brkts and Hardware
- Increased ground clearance; No strut disassembly or strut compressor required for installation; Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
Lifted dual-rate coil springs Upper adjustable control arms with flex joints Lower adjustable control arms with flex joints; Lifted dual-rate coil springs Upper adjustable control arms with flex joints
- Incredible articulation; No welding required; True 4-link setup with new, longer travel arms; Prevents binding and rear-steer; Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
- Includes our premium N3 shock absorbers; Coil correction plates correct the rear coil spring angle by 10 degrees, allowing them to function more effeciently; Gain unparalelled axle flex while keeping pinion angles optimized
- X-Flex control arm features: Clevite brand OEM style rubber bushings; Flex joints are fully rebuildable; Flex joints feature a massive 2.5in diameter body and 1.25in thread; Fully greasable
Lifted coil springs; Fixed upper and Adjustable lower control arms; Radius arm and Track-bar drop brackets; Sway-bar link extensions; Stabilizer relocation brackets; Pitman arm; Brake line brackets; Bumpstop spacers; Hardware
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fluid Rated To in40anddeg; CRubber bushings for better absorptionMetallic Silver PaintFree Shipping3-year Manufacturer’s Warranty
- 10-Stage Variable ValvingHigh Pressure Nitrogen Charged35mm PistonChromed Hardened 18mm Piston Rod54mm Shock Body to dissipate heat faster36kN Tensile StrengthSpring Loaded Piston Rod SealMilitary Spec
Throttle Body Spacer; Kit Contents: Throttle body spacer, gaskets, cable brackets, and hardware; Only fits models with 4.8L, 5.3L, or 6.0L Vortec engines; Not for use in California pending Air Resource Board exemption.
- Easy bolt-on installation; Improved torque performance; Increased fuel economy
- Easy Bolt-On Installation
- Improved torque performance
- Increased fuel economy
Kit Contents: Front: Coil springs, upper and lower control arms, sway bar link extensions, track bar relocation bracket, pitman arm, steering stabilizer relocation bracket; Rear: 3" blocks, add-a-leafs, u-bolts; Shocks: (4) N2.0 Shocks
- 100 percent simple bolt-on installation
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Easy Bolt-On Installation
- Levels the front and rear of the truck
- Can be easily returned to stock
- Retain your factory wheels by using our 0.25-inch wheel spacers SKU: 1065
- Lifetime Replacement Warranty
- Includes loaded struts for no-fuss installation
- No Cutting or Drilling required
- Includes New tubular upper control arms
- Control arms keep ball joints at optimum angles for less wear and tear
- Control arms include Clevite rubber bushings for enhanced durability
- Increased ground clearance
- Easy Bolt-On Installation
Vertex coilovers; Fixed Upr and Adjstbl Lwr Cntrl Arms; Front Drive Shft; Radius arm, Sway-bar and Track-bar drop brkts; Stabilizer relocation and Brake line brkts; Pitman arm; Stainless steel braided brake lines; Bumpstop spacers; Hardware
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability.
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks.
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem.
- Track width remains the same as factory
- 4in Collapsed Length: 18
- 9in Lifts and levels vehicle from front to rear Includes driver and passenger side front coilovers 8-Stage Adjustable Damping Monotube Design Nitrogen-Charged Remote Reservoir with Steel Braided Reservoir Line Massive 2
- Extended Length: 24
Lifted coil springs Sway bar links Forged track bar Bump stops Hardware
- Easy Bolt-On Installation
- Increased ground clearance
- Clears up to 37in tires
- Increased ground clearance
- Can run factory 20in wheels
- Provides highly sought level stance
- High clearance crossmember design gives unmatched ground clearance
- 100% precision laser cut materials using the latest computer aided design process
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
Contents: Knuckle adapters, diff drop brkts, front/rear crossmbr drop brkts, bumpstop ext brkts, brakeline brkts, sway bar drop brkts; Bumpstop ext brkts, brake line proportioning valve brkt, 4" Lft blocks, u-bolts; Shocks: (4)N2.0 Shocks
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Easy Bolt-On Installation
Kit Contents: Front: Lifted knuckles, coil spring spacers, front and rear crossmembers, extended sway bar links, and hardware; Rear: Anti-wrap lift blocks, u-bolts, and hardware; Shocks: (4) Premium N2.0 Shocks
- Spring loaded piston rod seal
- 10-Stage Variable Valving
- Bolt-on installation
- Military Spec. Fluid Rated To -50 degrees Celsius
- Increased ground clearance
- High-clearance crossmembers
- Specially designed anti-wrap rear blocks are significantly less susceptible to axle wrap
- N2.0 shocks are application valved providing optimum on and off-road performance and feature:
- Nitrogen-Charged
- Massive 1 3/8in Bore
- Chrome hardened 9/16in piston rod
Contents: Lft coil springs, Up Adj control arms, Lwr Adj control arms, Sway-bar quick discon, Forged Adj track bar, Track bar brkt, Pitman arm, Stainless steel braided brake lines, Shock reloc brkts, Hardware; Lft coil springs, Up Adj contr
- Easy, 100% Bolt-On Installation
- Adjustable retainer ring
- Fully greasable
- Front adjustable track bar is made of forged solid steel for strength and durability
- Coil correction plates correct the rear coil angle 10-degrees and allow the rear coil springs to function more efficiently
- Application valved Performance 2.2 series shocks
- X-Flex control arms:
- Clevite OEM style rubber bushings
- Flex joints with 2.5in diameter body and 1.25in threads
- Fully rebuildable and greasable
- Increased ground clearance
- Track width remains the same as factory
- Works with 18in or larger factory wheels
- Levels the front of the vehicle with the rear
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
Kit Contents: Front: (2) Upper strut spacers, (2) pre-load spacers, and hardware; Body Lift: Body lift pucks, front bumper brackets, rear bumper brackets, rear bumper support tube, and hardware
- Maintains factory ride quality
- Increased ground clearance
- Works with factory wheels
- Levels the front of the vehicle with the rear of the vehicle
- Body lift includes front and rear bumper brackets
- Body lift pucks are made from fiberglass reinforced nylon for superior strength and durability
- Body lift features 10.9 grade body mount bolts
- Body lift hardware is zinc coated to protect against the elements
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Unmatched ground clearance due to high clearance crossmember design
- 100% precision laser cut materials using the latest computer aided design process
- Levels the front of the vehicle with the rear
- Will work with factory 18-inch or larger wheels
- Requires no modification to the stock differential mounts, drivetrain or exhaust
- Lifted front struts help maintain smooth, factory-like ride
- Front struts are structurally engineered for lifted applications
- Front struts are lifted 6in, eliminating the need for strut spacers
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problem
- Can run factory 20in wheels
- Provides highly sought level stance
- High clearance crossmember design gives unmatched ground clearance
- 100% precision laser cut materials using the latest computer aided design process
- Fabricated blocks are stronger and offer a longer lifespan than cast blocks
- Easy bolt-on installation; Increased ground clearance; Clears up to 35″ tires
- Easy Bolt-On Installation
- Increased ground clearance
- Clears up to 35in tires
Contents: Coil springs, upper and lower control arms, front stainless steel brake lines, sway bar link exts, track bar reloc brkt, pitman arm, steering stabilizer reloc brkt; 3" blocks, add-a-leafs, u-bolts; Shocks: (4)N2.0 Shocks
- 100 percent simple bolt-on installation
- Easy Bolt-On Installation
- Increased ground clearance
- Levels the front of the vehicle with the rear
- Radius arm drop brackets allow for properly set caster. Proper caster is crucial to maintaining factory handling and driveability
- Includes application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use
Contents: High flex coil springs, Lwr and Up high clear X-Flex arms, control arm mounting brkts, forged Adj track bar with drop brkt, drop pitman arm, sway bar discon with parking brkt, stainless steel brakelines; High flex coil springs, Lw
- Front and rear adjustable track bars are made of forged solid steel for unsurpassed strength and durability
- Fully rebuildable and greasable
- Fully greasable
- Adjustable retainer ring
- Upper joints pivot up to 20 degrees
- Lower joints pivot up to 35 degrees
- High clearance design lower control arms
- Extreme travel long arms keep optimum alignment and give optimum articulation
- Clevite OEM style rubber bushings
- Flex joints with 2.5in diameter body and huge 1.25in threads
Showing 1–48 of 1118 results